No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Entropy Label for Global Tunnels

Configuring the Entropy Label for Global Tunnels

The entropy label can be configured to global tunnels to improve load balancing performance.

Context

If severe load imbalance occurs, the entropy label can be configured for global tunnels to help transit nodes properly load-balance traffic. The entropy label capability is enabled on the egress for tunnels. An entropy label is configured in the tunnel interface view to confirm the tunnel entropy label requirement, and the ingress sends the requirement to the forwarding plane for processing.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls te

    MPLS TE is globally enabled.

  4. Run mpls te entropy-label rsvp-te

    The entropy label is configured for global tunnels.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19469

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next