No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Policy for Triggering LSP Establishment

(Optional) Configuring a Policy for Triggering LSP Establishment

A policy can be configured to enable LDP to use eligible routes to establish LSPs.

Context

To establish ingress and egress LSPs on a public network, a policy can be configured to enable LDP to use eligible routes to establish LSPs.
NOTE:

An LSP can be established only when each LSR along the LSP has a route matching the FEC for the LSP.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run lsp-trigger { all | host | ip-prefix prefix-name| none }

    A policy for triggering LSP establishment is configured.

    • all: allows LDP to use IGP routes and static routes to establish LSPs. Neither public network BGP routes nor default routes can be used to establish LSPs.

    • ip-prefix: allows LDP to use FECs filtered by an IP address prefix list to establish LSPs.

    • none: disables LDP from establishing LSPs.

    NOTE:

    If the triggering policy is changed from all to host, the LSPs that have been established using host routes are not reestablished.

  4. Run commit

    The configurations are committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19991

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next