No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Link Bandwidth

(Optional) Configuring Link Bandwidth

By configuring the link bandwidth, you can constrain the bandwidth of a CR-LSP.

Context

Perform the following steps on each node along the CR-LSP:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The MPLS-TE-enabled interface view is displayed.

  3. Run mpls te bandwidth max-reservable-bandwidth bw-value

    The maximum available bandwidth of the link is configured.

  4. Run mpls te bandwidth bc0 bc0-bw-value

    The BC bandwidth of the link is configured.

    NOTE:
    • The maximum reservable bandwidth of a link cannot be higher than the actual bandwidth of the link. A maximum of 80% of the actual bandwidth of the link is recommended for the maximum reservable bandwidth of the link.
    • The BC0 bandwidth cannot be higher than the maximum reservable bandwidth of the link.

  5. Run commit

    The configurations are committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19398

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next