No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Alarm Thresholds for RSVP LSPs

Configuring Alarm Thresholds for RSVP LSPs

This section describes how to configure alarm thresholds for RSVP LSPs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-lsp-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value

    The upper and lower thresholds of alarms for RSVP LSP usage are configured.

    The parameters in this command are described as follows:

    • upper-limit-value specifies the upper threshold of alarms for RSVP LSP usage. An alarm is generated when the proportion of established RSVP LSPs to total supported RSVP LSPs reaches the upper limit.
    • lower-limit-value specifies the lower threshold of clear alarms for RSVP LSP usage. A clear alarm is generated when the proportion of established RSVP LSPs to total supported RSVP LSPs falls below the lower limit.
    • The value of upper-limit-value must be greater than that of lower-limit-value.

  4. Run commit

    The configurations are committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 22074

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next