No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Packet Fragmentation on an MPLS P Node

(Optional) Configuring Packet Fragmentation on an MPLS P Node

This section describes how to configure packet fragmentation on an MPLS P node.

Background Information

A network with increasing scale and complexity allows for devices of various specifications. Without packet fragmentation enabled, an MPLS P node transparently transmits packets sent by the ingress PE to the egress PE. If the MTU configured on the ingress PE is greater than the MRU configured on the egress PE, the egress PE discards packets with sizes larger than the MRU.


This configuration task is supported only on the Admin-VS.


Before configuring packet fragmentation on an MPLS P node, configure MPLS functions.


Packet fragmentation on the MPLS P node takes effect on MPLS packets that only have less than or equal to five labels and inner IPv4 labels.


  1. Run system-view

    The system view is displayed.

  2. Run slotslot-id

    The slot view is displayed.

  3. Run mpls fragment enable

    MPLS fragmentation is enabled on a P node.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 20112

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next