No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Protection Switching Trigger Mechanism

(Optional) Configuring the Protection Switching Trigger Mechanism

This section describes how to configure the protection switching trigger mechanism for a tunnel protection group to forcibly switch traffic to the working or protection tunnel. Alternatively, you can perform a traffic switchover manually.


Read switching rules before configuring the protection switching trigger mechanism.

Perform the following steps on the ingress of the tunnel protection group as needed:


  1. Run system-view

    The system view is displayed.

  2. Run interface tunnel interface-number

    The tunnel interface view is displayed.

  3. Select one of the following protection switching trigger methods as required:

    • To switch traffic to the protection tunnel, run mpls te protect-switch manual

    • To cancel the configuration of the protection switching trigger mechanism, run mpls te protect-switch clear

    The preceding commands can take effect immediately after being run, without the commit command executed.

Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 20097

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next