No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the RSVP Hello Extension

Enabling the RSVP Hello Extension

The RSVP Hello extension is configured on a GR node and its neighbor to rapidly monitor reachability between these RSVP nodes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te hello

    The RSVP Hello extension is enabled globally.

  4. Run quit

    The system view is displayed.

  5. Run interface interface-type interface-number

    The view of an RSVP-enabled interface is displayed.

  6. Run mpls rsvp-te hello

    The RSVP Hello extension is enabled on an interface.

    After RSVP Hello extension is enabled globally on a node, enable the RSVP Hello extension on each interface of the node.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19568

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next