No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring PCEP Session Authentication

(Optional) Configuring PCEP Session Authentication

PCEP session authentication can be configured to improve network security and defend against attacks.

Usage Scenario

Keychain authentication can be configured to secure a PCEP session established between the PCE server and client, which prevents access of unauthorized users.


  1. Run system-view

    The system view is displayed.

  2. Run pce-client

    The PCE client view.

  3. Run connect-server ip-address

    A candidate server is specified for the PCE client.

  4. Run authentication_keychain keychain-name

    Keychain authentication is configured for PCEP sessions established between the PCE client and servers.

  5. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19976

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next