No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an RSVP Timer

Configuring an RSVP Timer

An RSVP timer is configured to define the interval at which Path and Resv messages are refreshed, and the timeout multiplier associated with the RSVP blocked state is also configured.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te timer refresh interval

    The interval at which Path and Resv messages are refreshed is set.

    NOTE:

    If the refresh interval is modified, the modification takes effect after the existing refresh timer expires. Do not set a long refresh interval or frequently modify a refresh interval.

  4. Run mpls rsvp-te keep-multiplier number

    The PSB and RSB timeout multiplier is set.

  5. Run commit

    The configurations are committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19809

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next