No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the Detection of Traffic with New mLDP MBB Incoming Labels

(Optional) Enabling the Detection of Traffic with New mLDP MBB Incoming Labels

A device can be enabled to monitor traffic with new mLDP MBB incoming labels to rapidly implement the MBB process and minimize traffic loss as needed.

Context

On a network with mLDP MBB enabled, if a network path fails, transient packet loss occurs because of the delayed switching timer for MBB LSPs on a downstream node. To prevent packet loss, enable the local device to monitor traffic with new mLDP MBB incoming labels.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls ldp

    The MPLS-LDP view is displayed.

  3. Run mldp p2mp

    mLDP P2MP is enabled globally.

  4. Run mldp make-before-break p2mp traffic-detect

    The detection of traffic with new mLDP MBB incoming labels is enabled.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19607

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next