No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Dynamic BFD for mLDP P2MP Tunnel

Verifying the Configuration of Dynamic BFD for mLDP P2MP Tunnel

After configuring dynamic BFD to monitor an mLDP P2MP tunnel, you can view BFD session information on the ingress on which an mLDP tunnel is established.

Prerequisites

The dynamic BFD for mLDP P2MP tunnel function has been configured.

Procedure

  • Run the display mpls bfd session protocol mldp p2mp [ root-ip root-ip { lsp-id lsp-id | opaque-value opaque-value } ] [ bfd-type ldp-tunnel ] command to check BFD session information.

Example

# Run the display mpls bfd session protocol mldp p2mp [ root-ip root-ip { lsp-id lsp-id | opaque-value opaque-value } ] [ bfd-type ldp-tunnel ] command to view BFD session information. The command output shows that the BFD session is Up, and the protocol type is mLDP P2MP.

<HUAWEI> display mpls bfd session protocol mldp p2mp
--------------------------------------------------------------------------------
                        BFD Information: MLDP P2MP TUNNEL                                                  
--------------------------------------------------------------------------------
  No                     : 1
  Protocol               : MLDP P2MP
  LspIndex               : 5000002
  RootIP                 : 1.1.1.9        
  LspID                  : 32769
  OpaqueValue            : 01000400008001
  Bfd-Discriminator      : 16385
  SerType                : L2VPN 
  ActTx                  : 3 
  ActRx                  : -- 
  ActMulti               : 0 
  Bfd-State              : Up 
  Time                   : 0 sec
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19914

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next