No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE20E-S V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Telnet

Application Scenarios for Telnet

Telnet

Telnet in the HUAWEI NE20E-S

The NE20E covers the following Telnet services:

  • Telnet server

    You can run the Telnet client application on a PC to log in to and manage a NE20E.

  • Telnet client

    After running the emulation terminal program or Telnet client application on a PC to set up a connection with a NE20E, you can run the telnet command to log in to and manage other devices. In the scenario shown in Figure 3-2, Device A acts as both a Telnet server and client.

    Figure 3-2 Telnet applications

Telnet applies to remote login. You can use Telnet to configure, monitor, and maintain remote or local devices.

As shown in Figure 3-3, you can use Telnet on Device A to remotely log in to Device B.

Figure 3-3 Telnet login

Telnet Redirection Login to Another Device

On the network shown in Figure 3-4, there is a reachable route between the PC and Device A but no IP network connection between the PC and Device B. To remotely manage Device B, connect Device A's asynchronous port to Device B's console port, enable Telnet redirection on Device A, and use a specified port on the PC to remotely log in to Device B for management.

Figure 3-4 Networking diagram for Telnet redirection login to another device

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055117

Views: 3983

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next