No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE20E-S V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Automatic Deployment Through ZTP for an Unconfigured Device

Automatic Deployment Through ZTP for an Unconfigured Device

On the network shown in Figure 8-3, the router is capable of ZTP. After the router is powered on and starts without configurations, it learns the intermediate file server address from the DHCP server and downloads the intermediate file from the intermediate file server. The intermediate file contains information about the version file server address, system software, and configuration file. After parsing the preceding information from the intermediate file, the Router downloads the system software and configuration file from the version file server. Automatic deployment is then completed after the router restarts.

Figure 8-3 Automatic deployment through ZTP for an unconfigured device
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055117

Views: 3953

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next