No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link 01

This is NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


In the network shown in Figure 2-5, an Eth-Trunk that bundles two full-duplex 1000 Mbit/s interfaces is established between Device A and Device B. The maximum bandwidth of the trunk link is 2000 Mbit/s.

Figure 2-5 Networking diagram of Eth-Trunk

Backup is enabled within the Eth-Trunk. If a link fails, traffic is switched to the other link to ensure link reliability.

In addition, network congestion can be avoided because traffic between Device A and Device B is balanced between the two member links.

The application and networking diagram of IP-Trunk are similar to those of Eth-Trunk.

Updated: 2019-01-03

Document ID: EDOC1100055118

Views: 3330

Downloads: 8

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next