No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link 01

This is NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Sub-interface

Sub-interface

In the network shown in Figure 2-4, multiple sub-interfaces are configured on the physical interface of Device. Like a physical interface, each sub-interface can be configured with one IP address. The IP address of a sub-interface must be on the same network segment as the IP address of a remote network, and the IP address of each sub-interface must be on a unique network segment.

Figure 2-4 GE Sub-interface

With these configurations, a virtual connection is established between a sub-interface and a remote network. This allows the remote network to communicate with the local sub-interface and consequently communicate with the local network.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055118

Views: 2537

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next