No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link 01

This is NE20E-S V800R010C10SPC500 Feature Description - Interface and Data Link

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Group

Interface Group

Generally, a device provides multiple interfaces, many of which have the same configuration. To simplify the configuration of interfaces, create an interface group and add interfaces to the interface group. When you run a command in the interface group view, the system automatically applies the command to all the interfaces in the interface group. In this manner, interfaces in a group are configured in batches.

Interface groups are classified into permanent and temporary interface groups. Multiple interfaces can be added to a permanent or temporary interface group to enable batch command configurations for the interfaces. The differences between permanent and temporary interface groups are described as follows:
  • After a user exits the view of a temporary interface group, the system automatically deletes the temporary interface group. A permanent interface group, however, can be deleted only by using a command.
  • Information about a permanent interface group can be viewed, whereas information about a temporary interface group cannot.
  • After a permanent interface group is configured, a configuration file is generated. However, no configuration file is generated after a temporary interface group is configured.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055118

Views: 3316

Downloads: 8

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next