No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - IP Multicast 01

This is NE20E-S V800R010C10SPC500 Feature Description - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of NG MVPN to IPTV Services

Application of NG MVPN to IPTV Services

Overview

Multicast services, such as IPTV services, video conferences, and real-time multi-player online games, are increasingly used in daily life. These services are transmitted over service bearer networks that need to:
  • Forward multicast traffic smoothly even during traffic congestion.
  • Detect network faults in a timely manner and quickly switch traffic from faulty links to normal links.
  • Ensure multicast traffic security in real time.

Networking Description

NG MVPN is deployed on the service provider's backbone network to solve multicast service issues related to traffic congestion, transmission reliability, and data security. Figure 8-41 shows the application of NG MVPN to IPTV services.
Figure 8-41 Application of NG MVPN to IPTV services

Feature Deployment

In this scenario, NG MVPN deployment consists of the following aspects:
  • On the control plane
    • Configure a BGP/MPLS IP VPN on the service provider's backbone network and ensure that this VPN runs properly.
    • Configure MVPN on the service provider's backbone network, so that PEs belonging to the same MVPN can use BGP to exchange BGP A-D and BGP C-multicast routes.
    • Configure P2MP tunnels on the service provider's backbone network.
    • Configure PIM on the private network to establish the VPN MDT.
  • On the data plane
    • Configure static multicast joining on sender PEs (PE1 and PE2) to direct multicast traffic to the P2MP tunnels corresponding to the I-PMSI tunnels.
    • Configure receiver PEs (PE3, PE4, PE5, and PE6) not to perform RPF checks.
You can use either single-MVPN or dual-MVPN networking protection to enhance network reliability or use either of the following solutions to protect specific parts of the MVPN:
  • To protect sender PEs, configure dual-root 1+1 protection.
  • To protect P-tunnels, configure P2MP TE FRR or use other MPLS tunnel protection technologies.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055119

Views: 13690

Downloads: 22

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next