No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - IP Multicast 01

This is NE20E-S V800R010C10SPC500 Feature Description - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of MSDP

Overview of MSDP

Definition

Multicast Source Discovery Protocol (MSDP) is an inter-domain multicast solution that applies to interconnected multiple Protocol Independent Multicast-Sparse Mode (PIM-SM) domains. Currently, MSDP applies only to IPv4.

Purpose

A network composed of PIM-SM devices is called a PIM-SM network. In real-world situations, a large PIM-SM network may be maintained by multiple Internet service providers (ISPs).

A PIM-SM network uses Rendezvous Points (RPs) to forward multicast data. A large PIM-SM network can be divided into multiple PIM-SM domains. On a PIM-SM network, an RP does not communicate with RPs in other domains. An RP knows only the local multicast source's location and distributes data only to local domain users. A multicast source registers only with the local domain RP, and hosts send Join messages only to the local domain RP. Using this approach, PIM-SM domains implement load splitting among RPs, enhance network stability, and facilitate network management.

After a large PIM-SM network is divided into multiple PIM-SM domains, a mechanism is required to implement inter-domain multicast. MSDP provides this mechanism, enabling hosts in the local PIM-SM domain to receive multicast data from sources in other PIM-SM domains.

NOTE:

In this section, a PIM-SM domain refers to the service range of an RP. A PIM-SM domain can be a domain defined by bootstrap router (BSR) boundaries or a domain formed after you configure static RPs on the router.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055119

Views: 12528

Downloads: 19

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next