No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - IP Multicast 01

This is NE20E-S V800R010C10SPC500 Feature Description - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Layer 2 Multicast

Overview of Layer 2 Multicast

Definition

Layer 2 multicast implements on-demand multicast data transmission on the data link layer. Figure 11-1 shows a typical Layer 2 multicast application where Device B functions as a Layer 2 device. After Layer 2 multicast is deployed on Device B, it listens to Internet Group Management Protocol (IGMP) packets exchanged between Device A (a Layer 3 device) and hosts and creates a Layer 2 multicast forwarding table. Then, Device B forwards multicast data only to users who have explicitly requested the data, instead of broadcasting the data.

Figure 11-1 Layer 2 multicast

Purpose

Layer 2 multicast is designed to reduce network bandwidth consumption. For example, without Layer 2 multicast, Device B cannot know which interfaces are connected to multicast receivers. Therefore, after receiving a multicast packet from Device A, Device B broadcasts the packet in the packet's broadcast domain. As a result, all hosts in the broadcast domain (including those who do not request the packet) will receive the packet, which wastes network bandwidth and compromises network security.

With Layer 2 multicast, DeviceB can create a Layer 2 multicast forwarding table and record the mapping between multicast group addresses and interfaces in the table. After receiving a multicast packet, Device B searches the forwarding table for downstream interfaces that map to the packet's group address, and forwards the packet only to these interfaces, which reduces bandwidth consumption. A multicast group address can be a multicast IP address or a mapped multicast MAC address.

Functions

Major Layer 2 multicast functions include:

  • IGMP snooping

  • Static Layer 2 multicast

  • Layer 2 SSM mapping

  • IGMP snooping proxy

  • Multicast VLAN

  • Layer 2 multicast entry limit

  • Layer 2 Multicast Instance

  • Multicast Listener Discovery Snooping

Benefits

Layer 2 multicast offers the following benefits:
  • Reduced network bandwidth consumption
  • Lower performance requirements on Layer 3 devices
  • Improved multicast data security
  • Improved user service quality
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055119

Views: 12482

Downloads: 19

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next