No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Feature Description - IP Multicast 01

This is NE20E-S V800R010C10SPC500 Feature Description - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Rosen MVPN

Overview of Rosen MVPN


Multicast VPN (MVPN) in Rosen Mode is based on the multicast domain (MD) scheme defined in relevant standards. MVPN in Rosen Mode implements multicast service transmission over MPLS/BGP VPNs.


MVPN in Rosen Mode transmits multicast data and control messages of PIM instances in a VPN over a public network to remote sites of the VPN.

With MVPN in Rosen Mode, a public network PIM instance (called a PIM P-instance) does not need to know multicast data transmitted in a PIM VPN instance (called a PIM C-instance), and a PIM C-instance does not need to know multicast data transmitted in a PIM P-instance. Therefore, MVPN in Rosen Mode isolates multicast data between a PIM P-instance and a PIM C-instance.

Updated: 2019-01-03

Document ID: EDOC1100055119

Views: 12614

Downloads: 19

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next