No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - MPLS 01

This is NE20E-S V800R010C10SPC500 Feature Description - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRLG Sharing Between Optical and IP Layers Within a Transport Network

SRLG Sharing Between Optical and IP Layers Within a Transport Network

Background

Although the IP layer and optical layer are connected, they cannot exchange routing information. The active and standby links at the IP layer can only be separated using statically planned SRLGs within the optical network, which delays service rollout and increases maintenance workload. To address these problems, the SRLG sharing function can be used. RSVP signaling at the optical layer sends SRLG attributes of transport links to the IP layer. The IP layer applies the SRLG attributes to IP links. This function helps select reliable paths for high reliability services at the IP layer based on SRLG constraints.

Principles

When a GMPLS UNI tunnel is established using RSVP, the extended RSVP protocol carries SRLG information on optical links to both ends of the GMPLS UNI tunnel. SRLG information is processed as TE SRLG information that is used to bind the GMPLS UNI tunnel to UNI links, which separates links for the primary and backup TE tunnels.

RSVP Path or Resv messages carry SRLG sub-objects to notify the IP layer of SRLG information about paths on an optical network. The ingress CN and engress CN at the IP layer flood the SRLG information to the other devices on at the IP layer. Then all devices on the network can establish the primary and backup TE tunnels on different links, preventing path overlapping.
Figure 6-8 SRLG sharing between optical and IP layers within a transport network
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055123

Views: 5815

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next