No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - MPLS 01

This is NE20E-S V800R010C10SPC500 Feature Description - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
UNI LSP Graceful Deletion

UNI LSP Graceful Deletion

UNI LSPs can be deleted in either of the following modes:
  • Graceful deletion: The ingress EN sends a Path message carrying an Admin_Status object with the delete (D) bit of 1 along a UNI LSP. Each node that receives the message along the UNI LSP disables the alarm function and starts a graceful deletion timer. After receiving the message, the egress EN replies with a Resv message carrying the Admin_Status object with the D bit of 1. The Resv message travels through the UNI LSP hop by hop to reach the ingress EN. The ingress EN sends a PathTear message to instruct the nodes to delete the UNI LSP after receiving the Resv message or after the graceful deletion timer expires.

  • Forcible deletion: Its process is similar to the process for deleting MPLS LSPs. The details are not provided.

The forcible deletion mode used on a transport network leads to a protection switchover and relevant alarms. To prevent unneeded switchovers and alarms, graceful deletion is used.
Graceful deletion is triggered in either of the following modes:
  • Triggered by configuration: A user runs the shutdown or reset command for a GMPLS UNI LSP, or modifies a GMPLS UNI tunnel attribute on the ingress EN. After this, a UNI LSP is deleted.

  • Triggered by a Notify message: A Notify message carries an Admin_Status object with the D bit of 1. It originates from internal transport nodes or the NMS and reaches the ingress EN. After receiving the message, the ingress EN deletes a UNI LSP.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055123

Views: 5787

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next