No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Feature Description - QoS 01

This is NE20E-S V800R010C10SPC500 Feature Description - QoS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Traffic Policing

Overview of Traffic Policing

Traffic policing controls the rate of incoming packets to ensure that network resources are properly allocated. If the traffic rate of a connection exceeds the specifications on an interface, traffic policing allows the interface to drop excess packets or re-mark the packet priority to maximize network resource usage and protect carriers' profits. An example of this process is restricting the rate of HTTP packets to 50% of the network bandwidth)

Traffic policing implements the QoS requirements defined in the service level agreement (SLA). The SLA contains parameters, such as the Committed Information Rate (CIR), Peak Information Rate (PIR), Committed Burst Size (CBS), and Peak Burst Size (PBS) to monitor and control incoming traffic. The device performs Pass, Drop, or Markdown actions for the traffic exceeding the specified limit. Markdown means that packets are marked with a lower service class or a higher drop precedence so that these packets are preferentially dropped when traffic congestion occurs. This measure ensures that the packets conforming to the SLA can have the services specified in the SLA.

Traffic policing uses committed access rate (CAR) to control traffic. CAR uses token buckets to meter the traffic rate. Then preset actions are implemented based on the metering result. These actions include:
  • Pass: forwards the packets conforming to the SLA.
  • Discard: drops the packets exceeding the specified limit.
  • Re-mark: re-marks the packets whose traffic rate is between the CIR and PIR with a lower priority and allows these packets to be forwarded.
Updated: 2019-01-03

Document ID: EDOC1100055126

Views: 8267

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next