No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Feature Description - VPN 01

This is NE20E-S V800R010C10SPC500 Feature Description - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of BGP/MPLS IP VPN

Overview of BGP/MPLS IP VPN

Definition

A BGP/MPLS IP VPN is a Layer 3 virtual private network (L3VPN), which uses BGP to advertise VPN routes and uses MPLS to forward VPN packets on the IP backbone networks of service providers (SPs).

Figure 7-1 BGP/MPLS IP VPN

As shown in Figure 7-1, a BGP/MPLS IP VPN consists of the following roles:

  • CE: An edge device on a customer network. A CE provides interfaces that are directly connected to the SP network. A CE can be a router, a switch, or a host. Usually, a CE is unaware of the VPN and does not need to support MPLS.

  • PE: An edge device on an SP network. A PE is directly connected to a CE. On an MPLS network, PEs process all VPN services. The requirements on the performance of PEs are rather high.

  • P: A backbone device on an SP network. A P is not directly connected to a CE. Ps only need to possess basic MPLS forwarding capabilities and do not maintain VPN information.

PEs and Ps are managed by SPs. CEs are managed by users, except that the users trust SPs with the management rights.

A PE can connect to multiple CEs. A CE can connect to multiple PEs of the same SP or of different SPs.

Purpose

  • MPLS seamlessly integrates the flexibility of IP routing and simplicity of ATM label switching. A connection-oriented control plane is introduced into an MPLS IP network, which enriches the means of managing and operating the network. On IP networks, MPLS TE has become an important tool in managing network traffic, reducing network congestion, and ensuring QoS.

    The VPNs using MPLS IP networks as the backbone networks are highly valued by carriers, and have become an important means of providing value-added services.

  • Unlike the IGP, BGP focuses on controlling route transmission and choosing optimal routes instead of discovering and calculating routes. VPNs use public networks to transmit VPN data, and the public networks use an IGP to discover and calculate their routes. The key to constructing a VPN is to control the transmission of VPN routes and choose the optimal routes between two PEs.

    BGP uses TCP (with port number 179) as the transport layer protocol, enhancing transmission reliability. VPN routes can be directly exchanged between two PEs with routers located between them.

    BGP can append any information to a route as optional BGP attributes. The information is transparently forwarded by BGP devices that cannot identify those attributes. Therefore, VPN routes can be conveniently transmitted between PEs.

    When routes are updated, BGP sends only updated routes rather than all routes. This implementation saves the bandwidth consumed by route transmission, making the transmission of a great number of routes over a public network possible.

    As an Exterior Gateway Protocol (EGP), BGP is best suited for VPNs that cross the networks of multiple carriers.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055135

Views: 10326

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next