No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining an ACL6

Maintaining an ACL6

This section describes how to clear ACL6 statistics and monitor the ACL6 operating status.

Clearing ACL6 Statistics

This section describes how to clear ACL6 statistics.

Context

ACL6 statistics cannot be restored after they are cleared. Exercise caution when running a reset command.

Procedure

  1. Run the reset acl ipv6 counter { acl6-number | name acl6-name | all } command in the user view to clear ACL statistics.

Monitoring the ACL6 Operating Status

This section describes how to monitor the ACL6 operating status.

Context

Run the following commands in any view to check the ACL6 operating status in routine maintenance.

Procedure

  • Run the display acl ipv6 { acl6-number | name acl6-name | all } command to check the ACL operating status.
  • Run the display time-range { time-name | all } command to check the configuration of a specified or all validity periods.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055376

Views: 15861

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next