No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining DHCPv6 Relay

Maintaining DHCPv6 Relay

This section describes how to monitor the DHCPv6 relay operating status and clear DHCPv6 relay packet statistics.

Monitoring the DHCPv6 Relay Operating Status

This section describes how to monitor the DHCPv6 relay operating status.

Context

You can run the following command in any view to check the DHCPv6 relay operating status in routine maintenance.

Procedure

  • Run the display dhcpv6 relay statistics command to check packet statistics on a DHCPv6 relay agent.
  • Run the display dhcpv6 relay userinfo table command to check DHCPv6 client information on a DHCPv6 relay agent.
  • Run the display dhcpv6 relay client-info command to check DHCPv6 client login failure and logout records on a DHCPv6 relay agent.

Clearing DHCPv6 Relay Statistics

This section describes how to use the reset command to clear DHCPv6 relay packet statistics.

Context

DHCPv6 relay statistics cannot be restored after they are cleared. Exercise caution when running the reset commands.

Procedure

  • Run the reset dhcpv6 relay statistics command to clear DHCPv6 relay packet statistics.
  • Run the reset dhcpv6 relay userinfo table command to clear DHCPv6 client information on a DHCPv6 relay agent so that all resources allocated to clients are released.
  • Run the reset dhcpv6 relay client-info command to clear DHCPv6 client login and logout records on a DHCPv6 relay agent.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055376

Views: 15864

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next