No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - IP Services
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IPv4 Statistics

Clearing IPv4 Statistics

You can delete IPv4 statistics.


ICMP or IP traffic statistics cannot be restored after they are cleared. Exercise caution when running a reset command.


  • Run the reset ip statistics command in the user view to clear IP and ICMP traffic statistics.
  • To clear statistics about packets that have been discarded because the packets' destination MAC addresses are different from an interface's MAC address or the packets' sizes exceed the interface's MTU, run the reset forward-statistics packet discard [ mac | mtu ] ipv4 { interface [ interface-type interface-number ] | slot slot-id } command.
Updated: 2019-01-02

Document ID: EDOC1100055376

Views: 15592

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next