Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Load Balancing Configuration
Load balancing improves packet forwarding performance on a network.
- Overview
Load balancing is classified as equal-cost multiple path (ECMP) or unequal-cost multiple path (UCMP). ECMP is automatically implemented by routing protocols, with no need for manual configuration, whereas UCMP is implemented using commands. - Licensing Requirements and Limitations for Load Balancing--S2E
- Licensing Requirements and Limitations for Load Balancing--S2F
- Configuring Load Balancing Mode
- Adjusting the Algorithm of Load Balancing
- Configuring Load Balancing Conditions
- Load Balancing Configuration Examples
This section provides UCMP configuration examples.
Previous
