No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSTP Parameters on an Interface

Configuring MSTP Parameters on an Interface

Multiple Spanning Tree Protocol (MSTP) implements Rapid Spanning Tree Protocol (RSTP) rapid convergence. To achieve rapid convergence, you need to configure proper MSTP parameters.

Applicable Environment

In some specific networks, MSTP parameters will affect the speed of network convergence. Configuring proper MSTP parameters is required.

NOTE:

The default parameters also can be used to complete MSTP rapid convergence. Therefore, the configuration procedures and steps in this command task are all optional.

Pre-configuration Tasks

Before configuring MSTP parameters, complete the following task:
  • Configuring basic MSTP functions

Configuration Procedures

You can choose one or more configuration tasks (excluding "Checking the Configuration") as required.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 17019

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next