No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Eth-Trunk Interfaces

Maintaining Eth-Trunk Interfaces

The reset commands help locate faults on Eth-Trunk interfaces.

Clearing the Statistics on Eth-Trunk Interfaces

Before collecting traffic statistics within a specified period of time on an Eth-Trunk interface, you need to clear existing statistics on the interface.

Context

Statistics cannot be restored after being cleared. Exercise caution when running the following commands.

Procedure

  • Run the reset counters interface eth-trunk [ trunk-id ] command in the user view to clear statistics on an Eth-Trunk interface.
  • Run the reset lacp statistics eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command in the user view to clear statistics on an Eth-Trunk interface in static LACP mode.
  • Run the reset e-trunk packet-statistics [ e-trunk-id e-trunk-id ] command in the user view to clear statistics on an E-Trunk.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 16937

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next