No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MSTP Multi-process Configuration

Verifying the MSTP Multi-process Configuration

After Multiple Spanning Tree Protocol (MSTP) multi-process is configured, verify the configuration.

Prerequisites

All configurations of MSTP multi-process are complete.

Procedure

  1. Run the display stp process process-id [ instance instance-id ] [ interface interface-type interface-number ] [ brief ] command to view spanning-tree status and statistics.

Example

Run the display stp command, and you can view the working mode of the spanning tree and port priority configured in a Multiple Spanning Tree Protocol (MSTP) process. For example:

<HUAWEI> display stp process 2 interface gigabitethernet 0/1/2
----[CIST][Port2(GigabitEthernet0/1/2)][FORWARDING]----
 Port Protocol       :enabled
 Port Role           :Root Port
 Port Priority       :128
 Port Cost(Dot1T )   :Config=auto / Active=1
 Desg. Bridge/Port   :32768.00e0-0c1f-4100 / 128.1
 Port Edged          :Config=default / Active=disabled
 Point-to-point      :Config=auto / Active=true
 Transit Limit       :147 packets/hello-time
 Protection Type     :Root
 Port STP Mode       :MSTP
 Port Protocol Type  :Config=auto / Active=dot1s
 BPDU Encapsulation  :Config=stp / Active=stp
 PortTimes           :Hello 2s MaxAge 20s FwDly 15s RemHop 20
 TC or TCN send  :1
 TC or TCN received  :2
 BPDU Sent           :2
          TCN: 0, Config: 0, RST: 0, MST: 2
 BPDU Received       :76
          TCN: 0, Config: 0, RST: 0, MST: 76
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 17044

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next