No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Priorities and Root Protection in MSTP Multi-process

Configuring Priorities and Root Protection in MSTP Multi-process

You can configure priorities and root protection in Multiple Spanning Tree Protocol (MSTP) multi-process to protect links over access rings.

Context

To prevent loops over the access ring after the share links fails, configure priorities and root protection in MSTP multi-process.

Root protection is configured on the access interface of a device with second highest priority.

NOTE:
The MSTP priority of a downstream device must be lower than that of a UPE.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 16938

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next