No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining ERPS

Maintaining ERPS

This section describes how to maintain ERPS.

Clearing ERPS Statistics

The reset command can be used to reset the ERPS statistics to 0 so that statistics can be re-collected.

Context

ERPS statistics cannot be restored after they are cleared. Exercise caution when running the reset command.

Procedure

  1. Run the display erps [ ring ring-id ] statistics command in the user view to check statistics on the sent and received packets on the router ports added to the ERPS ring.
  2. Run the reset erps [ ring ring-id ] statistics command in the user view to clear ERPS statistics on the router.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 16601

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next