No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing MSTP Statistics

Clearing MSTP Statistics

You can run the reset commands to reset Multiple Spanning Tree Protocol (MSTP) statistics to 0.


MSTP statistics cannot be restored after you clear them. Therefore, exercise caution when using the reset commands.

After you confirm that MSTP statistics need to be cleared, run the following command in the user view.


  1. Run the reset stp [ interface interface-type interface-number | vsi vsi-name pw pw-name ] statistics command to clear spanning-tree statistics.
  2. Run commit

    The configuration is committed.

Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 16640

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next