No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Layer 2 Protocol Tunneling Configuration (Not By Replacing Multicast Destination MAC Address)

Layer 2 Protocol Tunneling Configuration (Not By Replacing Multicast Destination MAC Address)

L2PDU tunneling allows VPN L2PDUs to be transparently transmitted over a public network. This function is supported only on VPLS or VPWS networks. If L2PDUs traverse the backbone network, they may be processed by edge devices on the backbone network.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055378

Views: 16889

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next