No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - Security 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - Security
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining GTSMs

Maintaining GTSMs

This section describes how to clear the GTSM statistics for a new statistics collection.

Clearing the Statistics About the GTSM

Before collecting the GTSM statistics within a certain period on a board, you need to clear the existing statistics.


The statistics about the GTSM cannot be restored after being cleared. Therefore, use this command with caution.


  1. After confirming that you need to clear the statistics about the GTSM from a board, run the reset gtsm statistics { slot-id | all } command in the user view.

    This command is supported only on the Admin-VS.

Updated: 2019-01-02

Document ID: EDOC1100055397

Views: 22145

Downloads: 39

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next