No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - Security 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - Security
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing SOC Statistics

Clearing SOC Statistics

SOC statistics can be cleared, including statistics on packets that match ACL rules and statistics on packets to which CAR is implemented after they match ACL rules.

Context

After the SOC's attack defense function is enabled, if an interface is attacked, the SOC separately collects statistics on packets that match ACL rules and statistics on packets to which CAR is implemented after they match ACL rules. Before collecting statistics again, clear the existing statistics.

SOC statistics cannot be restored after they are cleared. Exercise caution when running the reset command.

Procedure

  • Run the reset soc attack-defend statistics slot slot-id command in the user view to clear statistics on packets that match ACL rules and statistics on packets to which CAR is implemented after they match ACL rules on the attacked interfaces on the board in a specified slot.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055397

Views: 20006

Downloads: 39

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next