No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - Security 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - Security
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Layer 2 Traffic Suppression

Maintaining Layer 2 Traffic Suppression

Before you start collecting statistics about Layer 2 traffic suppression, clear the existing statistics.

Procedure

  1. Run the reset traffic-statistics suppression interface { interface-name | interface-type interface-number } vsi vsi-name command or reset counters interface interface-type interface-number suppression vsi vsi-name command to clear statistics about Layer 2 traffic suppression on a specific interface in a specific VPN instance.
  2. Run the reset traffic-statistics suppression vsi name vsi-name peer peer-address [ negotiation-vc-id negotiation-vc-id ] command to clear the traffic suppression statistics about a PW.
  3. Run the reset traffic-statistics suppression interface { interface-name | interface-type interface-number } [ vlan vlanid | bd bd-id ] command or reset counters interface interface-type interface-number suppression [ vlan vlan-id | bd bd-id ] command to clear statistics about Layer 2 traffic suppression on a specific interface in a specific VLAN.
  4. Run the reset traffic-statistics suppression vsi name vsi-name [ peer peer-address [ negotiation-vc-id negotiation-vc-id ] | uni ] command to clear statistics about traffic suppression in a specified VSI.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055397

Views: 21550

Downloads: 39

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next