No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - Security 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - Security

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring an 802.1X Supplicant

Example for Configuring an 802.1X Supplicant

Networking Requirements

As shown in Figure 17-4, the NE20E functions as an 802.1X supplicant and connects to an authenticator. 802.1X authentication is implemented to ensure that the NE20E will not be replaced.

Figure 17-4 Typical networking for 802.1X supplicant authentication

Configuration Roadmap

The configuration roadmap is as follows:

  • Configure a RADIUS authentication scheme.
  • Configure an authenticator.
  • Configure an 802.1X supplicant template and enable the 802.1X supplicant function on an interface.

Data Preparation

To configure 802.1X authentication, you need the following data:

  • Name of the 802.1X supplicant template, user name, password, and authentication mode
  • Name of the interface on which the 802.1X supplicant function is enabled

Procedure

  1. Create an 802.1X supplicant template numbered 1 and enter the 802.1X supplicant template 1 view.

    <HUAWEI> system-view
    [HUAWEI] dot1x-supplicant-template 1

  2. Configure a user name and password for the 802.1X supplicant template 1 as huawei and Huawei@123, respectively.

    [HUAWEI-dot1x-supplicant-template-1] eap username huawei password cipher Huawei@123
    [HUAWEI-dot1x-supplicant-template-1] quit

  3. Enable the 802.1X supplicant function on GE 0/2/0 and specify the number of the 802.1X supplicant template as 1.

    [HUAWEI] interface Gigabitethernet 0/2/0
    [HUAWEI-Gigabitethernet0/2/0] dot1x supplicant enable template 1
    [HUAWEI-Gigabitethernet0/2/0] quit

  4. Verify the configuration.

    <HUAWEI> display dot1x supplicant
    ---------------------------------------------------------------------------
     Interface                        Status                   Template Index  
    ---------------------------------------------------------------------------
     GigabitEthernet0/2/0             initial                  1               

Configuration Files

Configuration file of the NE20E

#
dot1x-supplicant-template 1
 eap username huawei password cipher %^%#J$iaV.oS4VZKv+Sui[<GZ%0=G=d^5Sr1@[BbvzBI%^%# 
#
interface GigabitEthernet0/2/0
 undo shutdown
 dot1x supplicant enable template 1
#
return
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055397

Views: 25833

Downloads: 52

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next