No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Forced Power Supply Function

(Optional) Configuring the Forced Power Supply Function

Context

The NE20E supports the forced power supply function for PDs through a PoE-capable port and the setting of maximum power for the port. You can manually assign maximum power to each port as needed. The manually configured maximum power takes precedence over the negotiated reference power of a PD. If the maximum power is manually set to a non-zero value, the manual setting takes effect on the port.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run poe max-power max-power

    The maximum output power is set for the interface during forced power supply.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 14634

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next