No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of VSs

Overview of VSs

Virtual system (VS) partitioning helps manage networks by layer.


As the demand on various types of network services is growing, network management becomes more complex. Requirements for service isolation, system security, and reliability are steadily increasing. The virtual private network (VPN) technique can be used to isolate services on a PS. If a module failure occurs on the PS, all services configured on the PS will be interrupted.

To prevent service interruptions, the VS technique is used to partition a PS into several VSs. Each VS functions as an independent network element and uses separate physical resources to isolate services.

Further development of the distributed routing and switching systems allows VS technique to fully utilize the service processing capability of a single PS. The VS technique helps simplify network deployment and management, and strengthen system security and reliability.

Relationship Between a PS and VSs

As shown in Figure 2-1, a physical router, which can be regarded as a PS, is partitioned into several VSs. Each VS functions as an independent router to process services.

Figure 2-1 VS partitioning


The PS administrator has the authority to manage all VSs. The VS administrator has the authority to query VSs but cannot manage them.

Basic Concepts

Figure 2-2 shows VS concepts.

Figure 2-2 VS concepts
Table 2-1 VS concept descriptions




Physical system


A VS is a virtual system on both software and hardware planes. Each VS performs independent routing tasks.

VSs share all resources, such as IPU, except interfaces. That is, VSs can share the IPU resources. Each VS has its own primary VS main board (PVMB) and configuration management instance. Generally, the routing management system and configuration management system work on the PVMB.


Each PS has a default VS named Admin-VS. All unassigned interfaces belong to this VS.

All VSs in a PS must use the same system software. Each VS is configured with its own configuration management system and routing protocols.


Main boards (MBs) are used to carry tasks on the management control plane.

In a VS, the IPU refers to a common MB.


A VS has many MBs, two of which manage the entire VS. The two MBs are PVMBs.

Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20153

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next