No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PoE

Configuring PoE

Power over Ethernet (PoE) refers to power supply through an Ethernet. It is also called power over LAN (PoL) or active Ethernet. After PoE is deployed, power supplies are not required for PoE-supporting devices, such as IP phones and APs. This function cuts the costs of power cables and cable routing.In the current usage scenario,the NE20E as a PSE device enables PoE functions and starts to supply power to the PD.

Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20290

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next