No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining 1588 ATR

Maintaining 1588 ATR

This section describes how to maintain 1588 ATR, including how to clear 1588 ATR statistics.

Usage Scenario

You can run the reset command to clear statistics about the configured 1588 ATR function.

Pre-configuration Tasks

The 1588 ATR function has been configured.

Clearing 1588 ATR Statistics

This section describes how to clear 1588 ATR statistics using the reset ptp-adaptive statistics command.

Context

Statistics cannot be restored after being cleared. Exercise caution when running the reset ptp-adaptive statistics command.

After you confirm the statistics need to be cleared, run the following command in the user view.

Procedure

  1. Run reset ptp-adaptive statistics

    1588 ATR statistics are cleared.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20307

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next