No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for LLDP--S2E

Licensing Requirements and Limitations for LLDP--S2E

Licensing Requirements

This feature is a basic feature and is not under license control.

Restrictions and Guidelines

Restrictions

Guidelines

Impact

The lldp enable command for enabling LLDP and the link-protocol transport lldp command for configuring transparent transmission through a PW are mutually exclusive. When packet transparent transmission over an LLDP PW is configured on an interface, LLDP is not enabled globally or on interfaces.

The lldp enable command in the system or interface view cannot be used together with the link-protocol transport lldp command.

If the two commands are run, transparent transmission of protocol packets does not take effect.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 14284

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next