No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Device Management--S2E

Licensing Requirements and Limitations for Device Management--S2E

Licensing Requirements

This feature is a basic feature and is not under license control.

Restrictions and Guidelines

Restrictions

Guidelines

Impact

Boards cannot be reseated, power-cycled, or reset during the upgrade of board firmware.

  • The system displays a message if a board is power-cycled or reset during the upgrade of board firmware.
  • No workarounds are available for the scenario where boards are reseated.

The board is damaged, asking users to perform an upgrade through commands or return the board for repair.

Only one user is allowed to run an upgrade command at the same time.

The system displays a message if another upgrade command is delivered during the upgrade of board firmware.

None

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20281

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next