No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the CFC Node Recovery Function

Enabling the CFC Node Recovery Function

This section describes how to enable the control plane and forwarding plane inconsistency recovery function.

Prerequisites

Before enabling the CFC node recovery function, ensure that the function to check the consistency between the control plane and forwarding plane has been enabled. If the function is disabled, run the undo set said-node cfc disable command to enable it.

Context

After the CFC node recovery function is enabled, if a fault occurs and the system enters the diagnosis state, the interface is restarted after a flow is considered faulty for three consecutive times.

This configuration task is supported only on the Admin-VS.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set said-cfc recovery enable

    The CFC node recovery function is enabled.

    To disable the control plane and forwarding plane inconsistency recovery function, run the undo set said-cfc recovery enable command.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20465

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next