No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining the Upgrade

Maintaining the Upgrade

By means of upgrade maintenance, the configuration file in the upgrade can be cleared.

Clearing the Name of the Patch File to Be Used at the Next Startup from the Configuration File

After the name of the patch file to be used at the next startup has been cleared from the configuration file, the system will not automatically load and run the patch file after being restarted.


Patch information cannot be restored after it is cleared. Exercise caution when running the command.


  • Run the reset patch-configure next-startup command to clear the name of the patch file to be used at the next startup.
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20419

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next