No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Activating Distributed Patch File

Activating Distributed Patch File

This section describes how to activate distributed patch files.

Applicable Environment

After a board is installed, activate the distributed patch file so that you can perform further configurations on the board.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run pnp-package enable

    The distributed patch file is activated.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 14341

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next