No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing a PoE Configuration Task

Establishing a PoE Configuration Task

Based on information about the application scenarios, pre-configuration tasks, and data preparations related to PoE configurations, users can plan and manage the power over Ethernet (PoE) function in a unified manner.

Usage Scenario

If the configurations displayed using the display poe power-state command are not suitable for a customer's usage scenario, the configurations must be modified to ensure that the PoE function meets the customer's requirement.

This command is supported only on the Admin-VS.

Pre-configuration Tasks

Before configuring the PoE function, complete the following tasks:

  • Power on the NE20E equipment and ensure that the NE20E equipment passes the self-check.
  • Connect the interfaces between the power sourcing equipment (PSE) and powered device (PD) to ensure that the link-layer status of the interfaces is Up.

Usually, the NE20E equipment can automatically detect whether its interconnected PD requires power supply and the PoE function can be normally used without user configurations. If you need to modify PoE settings, see the following topics.

Enabling the PoE Function

(Optional) Configuring the Time Range-based Power Function

(Optional) Configuring the Forced Power Supply Function

Verifying the PoE Configuration

Data Preparations

Before configuring the interface description information, prepare the following data.




Types and numbers of ports with the PoE function

Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 20476

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next