No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Alarm Threshold for the Usage of a Single CPU on a Board

Configuring the Alarm Threshold for the Usage of a Single CPU on a Board

This section describes how to configure the alarm threshold for the usage of a single CPU on a board.

Context

When the usage of a single CPU on a board is too high, measures must be taken to expand board capacity or adjust services to ensure proper service running.

This configuration process is supported only on the Admin-VS.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run forward alarm vcpu-usage multi-core threshold

    The alarm threshold for the usage of a single CPU on a board is configured.

  3. Optional: Run undo forward alarm vcpu-usage multi-core threshold

    The default alarm threshold for the usage of a single CPU is restored.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 14333

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next